Keystone RV Forums - View Single Post

**hankpage** · 10-20-2014, 08:39 AM

JMHO ..... Where you can, face the grease fittings to the inside so they can be greased without removing the wheels. The bushing on the spring-hanger end will egg shape slightly due to the shape of the spring eye. Point the bolts port towards the opening in the spring eye so grease can flow easily. If the shackles you received are thicker than the stock ones, you will need to use the supplied longer bolts. JM2¢, Hank

10-20-2014, 08:39 AM	#9
hankpage Site Team Join Date: Jun 2009 Location: Venice Posts: 5,346	JMHO ..... Where you can, face the grease fittings to the inside so they can be greased without removing the wheels. The bushing on the spring-hanger end will egg shape slightly due to the shape of the spring eye. Point the bolts port towards the opening in the spring eye so grease can flow easily. If the shackles you received are thicker than the stock ones, you will need to use the supplied longer bolts. JM2¢, Hank __________________ Hank & Lynn 2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r) 2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite