Quote:
Originally Posted by Ayotte
I just removed my valve and replaced it by simply joining the two lines together. My hookup point is three ft above the tank-can'see anything being forced back through the line. The tank is vented through the roof and if this vent plugs the toilet is not going to flush properly. What I can see how this valve operates it is an accident waiting to happen--water running all over inside the camper. The only venting part of this valve is to allow the water from the valve back to the hookup connection to drain out.
|
+1
I ripped that whole leak prone assembly out along with 30' of PEX tubing, rather than joining it under the sink. I just used a SharkBite 1/2" coupler to keep the sprayer working.
Ron W.