Quote:
Originally Posted by nitrohorse
I finally installed the TV mount in the bedroom of our 2015 Sprinter Copper Canyon 333 FWFLS. Got the mount up, cable and power hooked up, and started the channel search. Search ends on the "cable" selection on the TV and no channels. I then choose the "air" (antenna) option, and the same thing, no channels. Does anyone know how to check for power or signal at the cable connection? I used a brand new RG 6 cable, so I'm fairly confident that it's not the cable from the ceiling outlet to the TV. Thanks in advance for any help or suggestions.
|
Really have little information on your setup such as the coax cable to your TV where is the other end connected ? If you did a channel search TV has power. You mentioned that you tried it for CABLE as well as ON AIR. When you use the Antenna (On Air) the antenna booster switch should be on, whereas for Cable the booster should be off. Did you put your own ends on the new piece of RG6 or were they already on there?
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)