Quote:
Originally Posted by JRTJH
The antenna booster has connections for two TV's. Have you removed the booster from the wall to be sure that the bedroom cable is even connected? It may be just laying there, behind the booster.
Here is the link to the booster instructions: http://www.winegard.com/kbase/uploads/2451489.pdf |
First off, thanks to everyone who offered advice. I really do appreciate it. Secondly, I want to report my findings so that maybe someone else in the future may be saved a headache. The problem was with the cable and antenna being switched from the factory at the booster switch. When I turned the booster switch on for power amplification, the TV received signal with the cable from the TV hooked to the cable outlet on the wall. I don't want to be a whiner, but you'd think an employee could at least get the TV cables hooked up properly... Oh well, it that's the worst that happens, I'm doing damn good. Thanks again to all and happy camp in'.