wiring Haloview camera to Furion OEM wiring harness

[BBR]

I recently purchased a new Cougar 22mlswe trailer with the furion prewired mount for rear camera. I remove the Haloview RD10 camera system from our old Keystone trialer to mount on the new trailer.
When I powered up the camera I kept getting a "no Signal" message on the monitor. I tried re-pairing with no success. Looking on Web, there are comments that Keystone sometimes wires the Furion connector incorrectly.
Before I start rewiring connector to the trailer I would like to confrim what the correct connection is. I know it should be red to black, but there are many wires and it looks to like the red furion wire is connect to other (white/green wire) than black.
Can anyone confirm if this is correct.
Thanks in advance for any and all help.
BBR

[chuckster57]

Welcome to the forum

Red on camera wiring is positive, black is negative. Wiring at trailer, solid white is negative and white with a colored tracer is positive.

Most likely the clearance lights must be ON for the camera wiring to be “live”.

[BBR]

thanks, Wiring is correct and I have power coming to camera but nothing working. Are there lights that indicate power at camera and RT? If so, i seem to have dead camera and RT.
Seems odd. All worked two weeks ago when I removed it from old trailer.
BBR