Quote:
Originally Posted by chuckster57
Are your spring packs ABOVE the axle as required? And do you have the correct gap?
|
The gap from the I-Beam frame to the top of the spring plate is 6".
When you ask about ABOVE, are you talking about weight rating more than the axle? or spring pack on top of the axle?
Good Question: I’m thinking it’s a Lippert Trailer Axle Double Eye 4-Leaf Spring Kit with U-Bolts - 9/16" Eye Diameter, For 5,200-lb. Axles – Its connected to a Lippert Road Armor Shock Absorbing Equalizer Kit.
• Number of Leaves: 4
• Width: 1.75"
• Length (from center to center of the eyes): 25.25"
• Eye Diameter: 9/16"
• Type of Bushing: Nylon
•
Weight Capacity: 2,600 lbs.
•
Axle Capacity: 5,200 lbs.
I’ll need to verify with either Keystone or Dexter with VIN and/or axle Serial Number.
PS: Retired Wisconsin LEO, 24 years as Chief.
***I've tried to rotate the photo three times, and it will not save as rotated.