100 Watt Solar

[Shadowcats]

Installed a "Windynation," complete 100 Watt solar panel kit on my 2014 Bullet 310. The kit comes with the solar panel, charge controller, connectors, and mounting brackets. I mounted it center front, ran conduit from panel down to the front storage area where I mounted my controller...from there to the batteries. The panel puts out between 19 and 27 volts - depending on the sun...output to the batteries is a constant 13 volts. It even has an aux if wanted. Installation was easy, just took time running the wires and securing them. Now, if dry camping I have a constant source of power to my batteries...and it's free! Bought the kit off Amazon - under $150 - also Windynation has wonderful customer service. Had a smaller unit on my old RV and it kept the batteries up all winter too.

[Williston324]

Looks good. We're only going to do one five day dry camp next year and this might be an inexpensive option to consider. Your conduit is what I used to run my camera cable down the back of our fifth last year. It's still holding strong.

[Bluewater]

Great that these solar panels have come way down in price in the last few years..plus they are better I hear. I bought ours 4 years ago and now they are 1/2 what I paid. Good news all the way around. Enjoy

[grewen]

is that silicon we can see on the roof?

[Shadowcats]

Yup, after the install I sealed all the brackets and screws, much like the factory does. Just wanted to be sure everything was tight with no chance of leaks. The conduit is self stick, but used sealer on the connectors and the ends where the wire goes in. Seems to work pretty well.

[Festus2]

The manufacturers of EPDM rubber roof systems do not recommend that you use silicone or any other product that contains petroleum distillates as a sealant or cleaner. Both are potentially harmful to the rubber and silicone does not adhere well.

Later, if you have to re caulk or reseal the screws and fasteners on the solar panel, nothing will adhere to the silicone - even silicone - so in the end you will have to remove it when resealing.

Dicor rubber roof sealant is compatible with EPDM rubber roof and is a product that is widely used on the roof - both self-leveling and regular.

[Shadowcats]

Thanks for the heads up...I will certainly look into the roof sealer instead.

[Andymon]

How did you attach it to the roof? And, did the wind defector come with the kit?