2nd tv mount

[Bulletman]

Enjoying our first weekend out wit our new Bullet 230 bhs. We are loving it.
Was wondering if anyone has added a second tv mount on the bedroom side?
Thanks

[rgnmgr]

We put the factory installed TV in our bedroom using the mount below from Ebay. We added a larger Smart TV in its place.
This bracket is easy and inexpensive!

http://www.ebay.com/itm/Tilt-Swivel-...item2a37a6916e

[chuckster57]

Adding a tv bracket isn't a "stick it and go" sort of thing IMO. Find a stud to secure the mount, or you might find your tv on the floor at your next stop. Interior walls in RV's are thin, and even the lightest mounts/tv's can fall off if not secure. Hopefully there is a sticker that identifies a section of wall that has built in support, if not then I would find the 1X2 stud nearest your desired location.

[Bulletman]

RG.
Feels to me like the opposite side of the entertainment center is reinforced but there is no sticker. I had no intention of installing on the wall.
Thanks

[campertime]

I'm planning on doing the same thing.

Now that the TV's don't swing around 360 due to all the warranty issues with that design, I think Keystone should include a second mount on the bedroom side with cable hook up and all. But why would they LOL

I plan on installing a mount and a splitter in our 2400BH cause the DW likes to watch the nightly news from the comfort of her bed. Thanks for posting the link above looks like the perfect one

[rgnmgr]

I forgot to mention that I did add a vertical support (which I stained to match) on the bedroom side to which the TV mount was attached.

[Bulletman]

Originally Posted by rgnmgr

I forgot to mention that I did add a vertical support (which I stained to match) on the bedroom side to which the TV mount was attached.

pics??
thanks

[GT2400BH]

would love to see some pictures of your mounted 2nd TVs in your passports, Just bought a 2400BH and need to put one in the bedroom so wife can watch the news at night,



Thanks
2400BH GT
2012 Grand Cherokee 5.7L hemi

[Streeter]

Originally Posted by campertime

I'm planning on doing the same thing.

Now that the TV's don't swing around 360 due to all the warranty issues with that design, I think Keystone should include a second mount on the bedroom side with cable hook up and all. But why would they LOL

I plan on installing a mount and a splitter in our 2400BH cause the DW likes to watch the nightly news from the comfort of her bed. Thanks for posting the link above looks like the perfect one

campertime - did you ever mount the 2nd TV on the bed side in your 2400BH yet? If so, what mount did you use? I'm having a tough time finding a TV/mount that have a combined depth of less than 3.5" to fit behind the sliding doors. Any luck with this?

Thx

[363coupe]

I used this mount and a 24" Samsung LED TV on my 3220BH. I think the combined depth was around 2.75" I had 3.5" to work with as well.

http://www.amazon.com/gp/product/B00...ilpage_o09_s00

[rosede]

Originally Posted by 363coupe

I used this mount and a 24" Samsung LED TV on my 3220BH. I think the combined depth was around 2.75" I had 3.5" to work with as well.

http://www.amazon.com/gp/product/B00...ilpage_o09_s00

I've been thinking of doing the same to my Outback 272RK. There is a cable hookup and power in the bedroom ceiling near the wall that separates the bedroom from the rest of camper. I looked for a stud, and I think (its been a year since i did the search) that the best place to mount the bracket is near the top of the wall.

Whatever I go with has to be low profile. There isn't much room between the bed and the wall, and if the TV sticks out to far, I would run into it every time. Can this mount tilt? Since I have to mount the TV up by the ceiling, I would need to be able to tilt it down for better viewing.

Thank you.