|
03-10-2024, 11:35 AM
|
#1
|
Junior Member
Join Date: Mar 2024
Location: Melbourne
Posts: 2
|
2022 Cougar slide will not retract
Brand new to owning a travel tailor. Purchased a used 2022 Keystone Cougar 22MLS about a month ago. Getting ready to head out next week for a quick trip. However, the slide will go out but not not come back in. I was able to located the wires on the in command center that connect to the slide motor. By reversing the polarity using my portable drill battery I am able to close the slide. My question is......is there a bad relay somewhere? And where would it be? Its not behind the Command Center. I've tried to trouble shot everything as best I can with my limited knowledge. Ant ideas?
|
|
|
03-10-2024, 11:58 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,357
|
Welcome to the forum
The InCommand BCM (body control module) has the relays and is usually located in the front compartment area, may be behind a panel.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-10-2024, 04:33 PM
|
#3
|
Junior Member
Join Date: Mar 2024
Location: Melbourne
Posts: 2
|
Quote:
Originally Posted by chuckster57
Welcome to the forum
The InCommand BCM (body control module) has the relays and is usually located in the front compartment area, may be behind a panel.
|
Thank you!!!
|
|
|
03-10-2024, 05:58 PM
|
#4
|
Senior Member
Join Date: Oct 2019
Location: Central FL
Posts: 1,090
|
Quote:
Originally Posted by chuckster57
Welcome to the forum
The InCommand BCM (body control module) has the relays and is usually located in the front compartment area, may be behind a panel.
|
Replacement relays are available on Amazon. They are an automotive type relay. Just look up the part number.
__________________
2023 Cougar HT 23MLE
2020 F250 XLT CC 6.2 4WD
|
|
|
03-21-2024, 11:47 AM
|
#5
|
Junior Member
Join Date: Mar 2024
Location: Coral Springs
Posts: 4
|
Had exact same problem with one slide and the awning, would go out, but not come back in. Even the electric switch override wasn't working. I could hear the relay clicking but no power to the motor. I Pushed on the relays a wee bit and it worked. I removed the PCB and found the solder joints holding the relay holder in place were 'pitted' - i.e not making a great connection. I have resoldered all the pins, makes a lot more contact now. I ordered 12 new relays off Amazon for good measure. I refit next week, but I'm positive thats the issue. btw, new PCB anywhere form $800 up....
|
|
|
03-21-2024, 12:16 PM
|
#6
|
Senior Member
Join Date: Aug 2023
Location: East Valley, AZ
Posts: 176
|
https://www.keystoneforums.com/forum...ad.php?t=55729
Not sure how much the relays are on amatwon but Jameco was 2.50 each.
The ones I received from Jameco had a metal bracket on them. Razor knife and 5 seconds of work removed them.
__________________
Raptor Dave
It's not camping...It's an adventure!
|
|
|
03-21-2024, 07:41 PM
|
#7
|
Senior Member
Join Date: Oct 2019
Location: Central FL
Posts: 1,090
|
Quote:
Originally Posted by Jack Sprat
Had exact same problem with one slide and the awning, would go out, but not come back in. Even the electric switch override wasn't working. I could hear the relay clicking but no power to the motor. I Pushed on the relays a wee bit and it worked. I removed the PCB and found the solder joints holding the relay holder in place were 'pitted' - i.e not making a great connection. I have resoldered all the pins, makes a lot more contact now. I ordered 12 new relays off Amazon for good measure. I refit next week, but I'm positive thats the issue. btw, new PCB anywhere form $800 up....
|
Pitted solder joints could be several process indicators. I’ll look at mine again with a loupe, but I’ve already began the thought process on rewiring to manual switches.
__________________
2023 Cougar HT 23MLE
2020 F250 XLT CC 6.2 4WD
|
|
|
03-28-2024, 12:50 PM
|
#8
|
Junior Member
Join Date: Mar 2024
Location: Coral Springs
Posts: 4
|
Resolved
Just to finish the thread...
Installed the PCB after re-soldering the main power pins on the relay and everything works. I replaced all the relays with 'nilight' off of Amazon, $11 for 10, pretty sure the 'old' ones were fine as you can hear the click but no power to slides.
All is well, and saved over a grand...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|